Search
Generic filters
0
0
Subtotal: $0.00
No products in the cart.
0
0
Subtotal: $0.00
No products in the cart.
Search
Generic filters

TEST STRIP PERACETIC ACID 0-500

Peracetic Acid Test Strips are calibrated at 0, 100, 250, and 500ppm, and gives results in just seconds. The recommended strength of peracetic acid is typically 150-200ppm, however, this can vary by location. Check with your local health inspector to determine what ppm level you should be reaching.

  • Flip-Top Vial
  • Built-In Desiccant Liner
  • Shelf Life: 2 Years

INSTRUCTIONS:

  1. Remove Test Strip from the Vial, Do Not Touch the Test Pad with your Fingers
  2. Dip the Test Strip into the Solution to be Tested for 2 Seconds
  3. Remove & Shake Off Any Excess Liquid
  4. Compare the Test Pad to the Colour Chart After 10 Seconds

Login to view prices

/ 1Each
View order $0.00
0

Current Order List

0
Subtotal: $0.00
No products in the cart.
Product Code: test-paa500

TEST STRIP PERACETIC ACID 0-500

Product Information

Peracetic Acid Test Strips are calibrated at 0, 100, 250, and 500ppm, and gives results in just seconds. The recommended strength of peracetic acid is typically 150-200ppm, however, this can vary by location. Check with your local health inspector to determine what ppm level you should be reaching.

  • Flip-Top Vial
  • Built-In Desiccant Liner
  • Shelf Life: 2 Years

INSTRUCTIONS:

  1. Remove Test Strip from the Vial, Do Not Touch the Test Pad with your Fingers
  2. Dip the Test Strip into the Solution to be Tested for 2 Seconds
  3. Remove & Shake Off Any Excess Liquid
  4. Compare the Test Pad to the Colour Chart After 10 Seconds

Description

Peracetic Acid Test Strips are calibrated at 0, 100, 250, and 500ppm, and gives results in just seconds. The recommended strength of peracetic acid is typically 150-200ppm, however, this can vary by location. Check with your local health inspector to determine what ppm level you should be reaching.

  • Flip-Top Vial
  • Built-In Desiccant Liner
  • Shelf Life: 2 Years

INSTRUCTIONS:

  1. Remove Test Strip from the Vial, Do Not Touch the Test Pad with your Fingers
  2. Dip the Test Strip into the Solution to be Tested for 2 Seconds
  3. Remove & Shake Off Any Excess Liquid
  4. Compare the Test Pad to the Colour Chart After 10 Seconds
[print-me target="body"/]