Description

Peracetic Acid Test Strips are calibrated at 0, 100, 250, and 500ppm, and gives results in just seconds. The recommended strength of peracetic acid is typically 150-200ppm, however, this can vary by location. Check with your local health inspector to determine what ppm level you should be reaching.

• Flip-Top Vial
• Built-In Desiccant Liner
• Shelf Life: 2 Years

INSTRUCTIONS:

1. Remove Test Strip from the Vial, Do Not Touch the Test Pad with your Fingers
2. Dip the Test Strip into the Solution to be Tested for 2 Seconds
3. Remove & Shake Off Any Excess Liquid
4. Compare the Test Pad to the Colour Chart After 10 Seconds